Table of Contents
Advertisement
4. It should now successfully connect to your network, press
press SELECT to confirm.
F
Note: a. Radio will automatically save the WEP/WPA you've input, so no use to re-entered, unless a
<FACTORY RESET> is being executed.
After trying to connect to network, if it says:
Perhaps you need:
A. Check your router, see it working normally or not.
B. Relocate your radio to a more strength signer area, may be necessary! Make sure your
password is correct input.
F
Note: If you make a mistake at any point, press
5. To get your access code or FAQ solutions, press
or
to <STATION LIST>, and then
to go back to the previous screen.
or
to <HELP>, press SELECT to confirm.
10
Advertisement
Table of Contents
