Assembling The Upper V-Belt Guard - Pfaff 1244 Instruction Manual

Set-up and Initial Commissioning
8 Mounting the lower V-belt pulley
.01.05
 Loosen the screws 2 and align the belt guard bracket 1 so that the motor pulley and
 Use screw 4 to tighten the screws 2 and the belt guard 3.
8

Assembling the upper V-belt guard

.01.06
22
4
3
Fig. 8 - 05
V-belt run freely.
4
1
6
3
5
6
Fig. 8 - 06
2
 Screw the position fi nger 2 to the belt
guard part 3
2
 Use the screws 4 to screw on the belt
guard part 3
 Use the screws 6 to screw on the belt
guard part 5
2
1
The corner 1 of the belt guard
part 3 should be broken off
when using a large handwheel.