How To Check Or Change A Timer - Philips 14PV207 Owner's Manual

D Under '
VPS/PDC
button to switch 'VPS or PDC' on or off.
D The TIMER lamp on the front of the set will light up
when one or more of the TIMER blocks are
occupied.
D When you are recording, the red recording light at
the front of the TV-VIDEO Combi will be alight.
f
Confirm with the button when the information is
OK
correct.
E '
Press STANDBY to start recording
will appear on the screen. If you have programmed a
recording that should start within the next few minutes,
confirm with the STANDBY m
programmed a recording that will start at some later point
in time, confirm with the
D A programmed recording can only start, when the
machine is switched to standby.
D If you entered the wrong date for a daily/weekly
recording, your TV-VIDEO Combi will correct it
automatically.
g
If you confirmed with the
the button.
TIMER k
D The programming information has been stored in a
TIMER block.
h
Make sure that the cassette you have put in can be
recorded on.

How to check or change a TIMER

a
Press the TIMER k button on the remote control.
b
Select the line '
TIMER PROGRAMMING
menu buttons P rB
SqC button.
c
Select the TIMER you want to check or change with the
or button and confirm with the
P rB AP q
button.
d
Select the entry field with the
button.
e
Change any information with the
button or with the
0-9
', use the or
P rB AP q
button. If you have
button.
OK
button, exit the menu with
OK
' with the
or AP q and confirm with the
OK
DSr or SqC
or
P rB AP q
buttons.
D Under '
', use the
LP
select the recording speed 'SP' or 'LP'.
f
Confirm with the
correct.
g
Confirm the message on the screen with the
A TIMER recording can only start, if the set is not used for
other video recorder functions (e.g. playback).
D The programming information has been stored in a
TIMER block.
'
h
To end, press the
i
Make sure that the cassette you have put in can be
recorded on.
How to clear a TIMER
a
Press the TIMER k
b
Select the line '
Timer programming
menu buttons
P rB
button.
SqC
c
Select the TIMER you want to clear with the menu
buttons P rB or
d
Press the
CLEAR
e
Switch off with the
or button to
P rB AP q
button when the information is
OK
OK
button.
TIMER k
button on the remote control.
' with the
or and confirm with the
AP q
AP q .
button.
TIMER k button.
button.
17