HP FlexFabric 12500 Series Configuration Manual page 80

Routing
Hide thumbs Also See for FlexFabric 12500 Series:
Table of Contents

Advertisement

# Assign an IP address to the virtual management Ethernet interface and enable the Telnet service
on the interface to allow remote management of MDC A.
[MDCA]interface M-Ethernet 1/0/0/0
[MDCA-M-Ethernet1/0/0/0]ip address 192.168.1.251 24
[MDCA-M-Ethernet1/0/0/0]quit
[MDCA] telnet server enable
[MDCA] user-interface vty 0 15
[MDCA-ui-vty0-15] authentication-mode none
[MDCA-ui-vty0-15] user-role mdc-admin
# Return to the default MDC.
[MDCA-ui-vty0-15] return
<MDCA> switchback
[IRF]
4.
Create and configure MDCB for Company B:
# Create MDCB.
[IRF] mdc MDCB
It will take some time to create MDC...
This MDC was created successfully.
# Authorize MDCB to use the LPU in the master's slot 3 and the LPU in the subordinate member's
slot 5.
[IRF-mdc-3-MDCB] location chassis 1 slot 3
[IRF-mdc-3-MDCB] location chassis 2 slot 5
# Assign all interfaces on the LPUs to MDCB.
[IRF-mdc-3-MDCB] allocate interface GigabitEthernet 1/3/0/1 to GigabitEthernet
1/3/0/48
The configurations of the interfaces will be lost. Continue? [Y/N]:y
[IRF-mdc-3-MDCB] allocate interface GigabitEthernet 2/5/0/1 to GigabitEthernet
2/5/0/48
The configurations of the interfaces will be lost. Continue? [Y/N]:y
# Start MDCB.
[IRF-mdc-3-MDCB] mdc start
It will take some time to start MDC...
This MDC was started successfully.
[IRF-mdc-3-MDCB] quit
# Enter the IRF port views of MDC B and bind a physical IRF port to each IRF port.
[IRF] irf-port 1/1
[IRF-irf-port1/1] port group mdc 3 interface GigabitEthernet 1/3/0/1
[IRF-irf-port1/1] irf-port 2/2
[IRF-irf-port2/2] port group mdc 3 interface GigabitEthernet 2/5/0/1
[IRF-irf-port2/2] quit
[IRF] irf-port-configuration active
# Log in to MDCB from the default MDC and bring up the physical IRF ports.
[IRF]switchto mdc MDCA
******************************************************************************
* Copyright (c) 2010-2014 Hewlett-Packard Development Company, L.P.
* Without the owner's prior written consent,
* no decompiling or reverse-engineering shall be allowed.
76
*
*
*

Advertisement

Table of Contents
loading

This manual is also suitable for:

Flexfabric 12500e series

Table of Contents