Installation Procedure For Usb Interface - Scientific Atlanta WebSTAR DPR2320 User Manual

2 . 1 - 2 I n s t a l l a t i o
2 . 1 - 2 I n s t a l l a t i o
Follow the steps below for proper installation:
1. Make sure your computer meets the system requirements.
2. Connect a coaxial cable (supplied by the local Cable Television Company) to the CABLE
connector on the modem.
3. Plug the power adapter into the POWER connector of the modem.
4. Plug the other end of the power adapter into a power outlet.
5. Check CABLE LED. If it is solid ON, the Cable Modem is on-line now. If it is not, contact
your service provider.
6. Connect the USB cable to the USB connector on the modem.
Note: You can go to Chapter 3.1 "USB Driver installation" now
7. When the connection is established, the client PCs can access the Internet or remote network
through the WebSTAR Cable RG.
Note: You can go to Chapter 3.3 "Setting TCP/IP on client PC" now
Below shows the connection status among the cable modem and your computer.
n P r o c e d u r e f o r
n P r o c e d u r e f o r
U S B I n t e r f a c e
U S B I n t e r f a c e
- 4 -
WebSTAR Cable RG
User Manual