Vcr Control Buttons; Record With Your Vcr - Philips FTR9964 Owner's Manual

VCR Control buttons

SOURCE
SELECT POWER
VCR
TV CBL VCR AMP
HD SAT DVD CD
q l
Q
NATURAL
DNR VCR Prog EXIT INFO +
MOTION
a
S
CC
OK MENU
Ï
¬
VOL CH
1 2 3
4 5 6
7 8 9
SURF
0
® C º
Ò ‡ π †

Record with your VCR

To record S-VHS quality, connect an S-VHS peripheral directly to the VCR.
Record a TV program
You can record a TV program using your VCR's tuner without affecting your TV.
&
Select the channel number on your VCR.
é
Set your VCR to record.
See the handbook for your VCR.
Switching channel numbers on your TV does not disturb recording !
Record to VCR from
You can record a program on your VCR from the TV tuner via
&
Switch on the device.
é
Select the correct channel on your TV and the correct input on your VCR.
"
Set your VCR to record.
You record the tuner channel of the TV, even when you switch to an AV input using the
remote control.
Do not switch channels or turn off your TV when you are recording through
.
VIDEO OUT
Note: When a TV channel or AV source is blocked because of a rating set via the Channels menu (see p. 14), also the record output
picture and sound are muted.
VIDEO OUT
Most of the audio and video devices from our range of products can be
operated with the remote control of your TV.
Press the , ,
VCR DVD SAT, HD, CD, CBL
devices you want to operate with this remote control. See Use of the
remote control, p. 5.
VCR buttons
After you pressed the
VCR
door of the remote control:
®
for record,
C
VCR timer,
º
for pause,
Ò
for rewind,
‡
for stop,
π
for play,
†
for fast forward,
- CH + for sequential channel selection from the video recorder
tuner,
0 to 9 to select a channel number from your video recorder tuner,
These buttons function with devices that uses the RC5 signalling standard.
.
VIDEO OUT
or button according to the
AMP
button, press one of the VCR buttons under the
button on the
SOURCE SELECT
Record
25