Marantz SR6012 Owner's Manual page 152

Contents Connections
o Connection 2: Connecting using a speaker
output terminal
When "Assign Mode" is set to "ZONE2" in the menu, ZONE2 audio is
output from the SURROUND BACK speaker terminal. (v p. 202)
MAIN ZONE
This unit
0 The analog audio signal and the 2-channel PCM signal input from HDMI connector
or digital connectors (OPTICAL/COAXIAL) can be played back in ZONE2.
0 If you want to play back HDMI signals other than 2-channel PCM in ZONE2, set
"HDMI Audio" to "PCM". (v p. 230) The output from a device connected to the
input source selected for ZONE2 can be automatically converted to 2-channel
PCM.
In this case, the MAIN ZONE audio will also be converted to 2-channel PCM if the
MAIN ZONE and ZONE2 are set to the same input source. However, depending
on the playback device, the playback signal may not be converted to PCM even if
this setting is configured.
Front panel Display
Playback
(R) (L)
ZONE2
Rear panel
Settings
o Connection 3 : Connection using an external
amplifier (ZONE2)
The audio signals of this unit's ZONE2 audio output connectors are
output to the ZONE2 amplifiers and played on these amplifiers.
MAIN ZONE
This unit
152
Remote
Tips Appendix
ZONE2
Power amplifier
L
R
AUX IN
Index