Creating A User Vlan - Huawei Quidway S9300 Configuration Manual - Multicast

Quidway S9300 Terabit Routing Switch
Configuration Guide - Multicast
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
vlan vlan-id
A VLAN is created and the VLAN view is displayed.
Step 3 Run:
multicast-vlan enable
Multicast VLAN replication is enabled and the VLAN is configured as a multicast VLAN.
By default, multicast VLAN replication is disabled.
----End

1.5.3 Creating a User VLAN

Prerequisite
The multicast VLAN has been created.
Context
By default, a created VLAN is a common VLAN. After you configure the mapping between this
VLAN and the multicast VLAN, this VLAN becomes a user VLAN.
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
vlan vlan-id
A user VLAN is created.
To create multiple user VLANs, run this command repeatedly. You can also run the vlan
batch vlan-id1 to vlan-id2 command to create multiple VLANs at a time.
Step 3 Run:
quit
The system view is displayed.
Step 4 Run:
vlan vlan-id
The multicast VLAN view is displayed.
The vlan-id parameter specifies the ID of a multicast VLAN.
Issue 01 (2009-07-28) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1 Layer 2 Multicast Configuration
1-9