Maintenance Procedures; Clean; Wax; Inspect - Life Fitness MJACO-STA Owner's Manual

4. Maintenance Procedures

Maintenance Schedule

ACTION

CLEAN

Upholstery
Guide Rods
Shrouds
Hand Grips

WAX

Frames

INSPECT

Paint
Cable
Hardware
Frame
Hand Grips
Shrouds

LUBRICATE

Guide Rods
Clean
1. Upholstery with an approved or compatible cleaner.
2. Guide Rods with a cotton cloth.
3. Hand Grips with an approved or compatible cleaner.
Wax
Frames with a standard, non-abrasive, wax finish.
Inspect
1. Cables. Look for wear or damage and proper tension. Pay close attention at bends and attachment points.
2. Hardware. Check for loosening. Tighten as required.
3. Frames. Inspect for wear and damage.
4. Handgrips. Check for wear and damage.
5. For paint chips. Fill in immediately with LIFE FITNESS touch-up paint.
6. Jam Nut at top of weight stack for tightness.
Lubricate
Lubricate guide rods with Break-Free® brand lubricant (part number SK50-P0005-0000). Apply the lubricant to a cotton
cloth, and then run the cotton cloth up and down the guide rods as needed.
Note: Only a few drops of lubricant are required for each guide rod.
DAILY WEEKLY
X
X
X
Page 59 of 63
MONTHLY
X
X
X
X
X
X
AS NEEDED
X
X
X