Table of Contents
Advertisement
Firmly insert the SCART cables to the ports:
1. Plug the connector straight into the port.
2. Apply some force when you insert the connector.
Connect the power adapter
C
1. Take the supplied power adapter (C).
2. Plug the connector into the DC 9V power
connector on the transmitter (A).
3. Plug the adapter into the power outlet.
Check the operation of TV1
D
1. Switch on TV1.
2. Switch on the connected video source.
3. Select the correct SCART input on TV1.
4. Check if TV1 shows the image of the video source.
> The transmitter is connected correctly.
2
Connect receiver
Preparation
A
1. Switch on the transmitter (A).
2. Switch on the video source.
3. Take these items:
•
Receiver (B)
•
Power adapter (C)
•
Remote control of a video source.
•
This quick start guide (D)
4. Go to TV2.
3
1
AC
DC 9V
ON/OFF
1
DC 9V
2
Advertisement
Table of Contents
