Related Manuals for Philips SLV4200
Summary of Contents for Philips SLV4200
- Page 1 Register your product and get support at www.philips.com/welcome SLV4200 Wireless TV Link...
-
Page 3: Table Of Contents
Table of contents Important Power requirements Conformity Recycling and disposal Electric, Magnetic and Electromagnetic Fields ("EMF") 5 Installation requirements Your Wireless TV link What’s in the box Overview of the Wireless TV link Getting started Connect transmitter Install the remote control blaster cord Connect receiver Enjoy... -
Page 4: Important
Following this directive, this product can be brought into service in the following states: Class identifier. This is a class 1 product. We, Philips, declare that the product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. You can find the Declaration of Conformity on www.p4c.philips.com. -
Page 5: Recycling And Disposal
?evidence available today. Philips plays an active role in the development of international EMF and safety standards, enabling Philips to anticipate further ?developments in standardisation for early... -
Page 6: Installation Requirements
Installation requirements The product transmits and receives radio waves when it is switched on. The product complies with the standards that are defined for it. As the product is based on RF technology, the quality of the image can be influenced by microwave ovens, Bluetooth, Wifi etc. -
Page 7: Your Wireless Tv Link
Your Wireless TV link Congratulations on your purchase and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. What’s in the box A. Transmitter C. SCART D. RCA/SCART cable cable Overview of the Wireless TV link... - Page 8 Transmitter Remote control blaster cord Control and display elements green: on (source 1) green: on (source 2) Power on/off switch Power input connector (DC 9V) RCA cable entry Antenna Wireless channel selection switch > Select from 4 available channels Remote control blaster cord port 10 SCART cable entry Control and display elements 11 Power light:...
-
Page 9: Getting Started
Getting started Connect transmitter Two video sources can be connected at the same time to the SLV4200 transmitter. The video sources can be following: DVD players/recorders, VCR, Game Consoles, Cable & Satellite Set-Top- Boxes, and more. Connect video source 1 to the transmitter (A). -
Page 10: Install The Remote Control Blaster Cord
b. Plug the adapter into the power outlet. c. The green LED on the front panel should be on. Note: if it is not the case, press the ON/ OFF switch on the back of the product. Check that TV1 is working well a. -
Page 11: Enjoy
- Switch on the Video source. - Take these items: • Receiver (B) • Power adapter (E) • Remote control of the video source. - Go to TV2. Connect the receiver to the second TV (TV2) Plug the SCART cable of the receiver (B) into the SCART port of TV2. -
Page 12: Select Source
Note: If the VCR or DVD recorder records a television program, you watch the recorded channel. Note: how to watch a video source on TV1? Use your TV1 and your video source as usual to watch a video source on TV1. Note: In case the video source does not react the IR control blaster might not be installed properly. -
Page 13: Technical Data
Technical Data Transmitter System: RF (TV-LINK) Modulation: FM Weight: 0.27kg Dimensions: 120X182X40.2mm Carrier Frequency: 5750~5855MHz Channels: 4 Radiated Output Power: 25mW Effective Transmission Range: 35m Audio Input level: 2V Video Input level: 1.1V Power requirements: 9V/500mA IR Extender Receiver RF Frequency: 433.92MHz Receiving Sensitivity: -90 ~ -98 dBm IR carrier Frequency: 30~57kHz IR LED Operation Range:... -
Page 14: Frequently Asked Questions
Frequently asked questions www.philips.com/support In this chapter, you will find the most frequently asked questions and answers about your product. No image or wrong image on TV1 • Make sure the video source is switched on. • Make sure the video source is connected to the transmitter (A). - Page 15 Easylink feature does not work. • Check if the TV and VCR support Easylink. • Check if you used full-wired SCART cables. Black and white image with S-VHS VCR. • (Super Video Home System Video/ Cassette/Recorder) • Check if the SCART connector of the S-VHS VCR gives signal in CVBS.
-
Page 16: Information
Information Warranty One year limited warranty For 12 month from the date of purchase the manufacturer repairs or replaces any faulty product free of charge, subject to proof of purchase, provided the fault has not been caused by improper handling or use, and provided the product has not been damaged, whether as a result of an accident or of repair by others than the... -
Page 17: Index
INDEX Channel 12 Connect receiver 10 Connect transmitter 9 Enjoy 11 Frequently asked questions 14 Getting started 9 Information 16 Interference 12 Overview of the Wireless TV link 7 Remote control blaster cord 10 Technical Data 13 What’s in the box 7 Your Wireless TV link 7 INDEX... -
Page 18: Declaration Of Conformity
Declaration of Conformity... - Page 19 © 2009 Koninklijke Philips Electronics N.V. All rights reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner. Document number: SLV4200_12_EN_UM_V1.1 145- 142000002 (master EN) Printed in China...