Service Positions - Philips MX2500/01 Service Manual

Dismantling of the Tuner PCB
1) Loosen 10 screw " C " at the back panel as shown in figure
7.
2) Loosen 6 screw " D " on the top of main board as shown in
figure 8.
Figure 8
3-2
C
Figure 7
D

SERVICE POSITIONS

Service position A
Note: In some service positions the components or copper patterns of one board may risk touching its neighbouring pc
boards or metallic parts. To prevent such short-circuit use a piece of hard paper or other insulating material between them.
Service position B
3-2