NETGEAR EX6100 User Manual page 23

- Disable Device's PIN. Selecting this check box disables the extender's PIN. The PIN
can be used for a WPS wireless connection.
- Keep Existing Wireless Settings. When this check box is selected, the settings in
the Wireless Settings screen stay the same when WPS is used for a wireless
connection.
• Wireless Card Access List. Specify a list of computers or wireless devices that are
allowed to connect to the network. If you use an access list, then computers that are not
on the list are not allowed to join the wireless network.

To set up a wireless card access list:
1. On the Advanced Wireless Settings screen, click Setup Access List.
The following screen displays:
2. Select the Turn Access Control On check box.
3. Add the computers and wireless devices that you want to give access to the network.
• Click the Add button for each device.
• If you are not sure of the MAC address, check the product label.
• Make sure to add the computer or wireless device that you are currently using to
make changes.
4. Click Apply so that your changes take effect.
EX6100 Universal Dual Band 11ac WiFi Range Extender
Extender Network Settings
23