Usb Configuration Submenu - HP ProLiant DL160 G5p Software Configuration Manual

USB Configuration submenu

Figure 16 USB Configuration submenu
NOTE: When you install USB storage, a USB Mass Device Configuration item is displayed. From this
item, you can get information about the device and configure it if needed.
Table 14
USB Configuration submenu fields
Field
USB Controller
USB 2.0 Controller
BIOS EHCI Hand-Off
Description
This setting allows the use of the USB function. The
setting default value is Enabled.
This setting makes the onboard USB function
unavailable.
This setting allows the use of USB ports transfer data in
480Mbps. This is the default setting.
This setting allows the use of USB ports transfer data in
12Mbps.
Set this value can support the EHCI-off, this is the default
value.
Set this value not allow support the EHCI-off.
Options
Enabled
Disabled
HiSpeed
FullSpeed
Enabled
Disabled
System BIOS configuration 25