HP ProLiant DL160 G5p Software Configuration Manual page 18

IPMI Configuration submenu
Figure 9 IPMI Configuration submenu
Table 8
IPMI Device Configuration submenu fields
Field
SEL Configuration
Serial Port Configuration
LAN Configuration
Watchdog Configuration
Description
Select SEL (System Event Log) configuration in the left frame of the screen to
go to the submenu for that item. Then you can press Enter to enter its
submenu. You can display an about SEL Configuration option by
highlighting it using the<Arrow> keys.
Select serial port configuration in the left frame of the screen to go to the
submenu for that item. Then you can press Enter to enter its submenu. You
can display an about Serial Port Configuration option by highlighting it
using the<Arrow> keys.
Select set LAN configuration in the left frame of the screen to go to the
submenu for that item. You can display an about LAN option by
highlighting it using the<Arrow> keys. Set LAN Setup options are described
in this section. The Set LAN BIOS Setup screen is shown below.
Select watchdog configuration in the left frame of the screen and
press<enter> to go to the submenu for that item. That will display POST
Watchdog timer configuration.
System BIOS configuration 18