Speaker Not Beeping After A Cook Cycle - TurboChef sota Service Manual

Check to see if the rear
vent catalyst (or possibly
main catalytic converter)
is clogged. Clean and/or
replace if necessary.
Obtain a firmware
update from TurboChef
technical support and
update the oven firm-
ware (page 32).
If complaints continue,
replace the display.
Troubleshooting:
Steam Present During or After Cooking
Perform both the daily and quarterly
cleaning procedures (pages 5-6). Verify the
ventilation holes on the rear vent catalyst
housing cover are not blocked with debris.
Steam still present
Is the rear vent catalyst
cover installed properly?
YES
(see page A-2, item 25).
Troubleshooting:

Speaker Not Beeping After a Cook Cycle

Does the speaker
YES beep when touching
a button?
NO
Unplug the oven for
10 seconds and plug it
YES
back in. Did the speaker
come back?
Install the rear vent
catalyst housing cover
NO
with the ventilation
holes at the bottom.
Replace the speaker and
NO
the speaker cable. Does
the problem persist?
YES
77