Radio Reception; Tuning To Radio Stations; Programming Radio Stations; Tuning To Preset Radio Stations - Philips MC150 User Manual

Radio Reception

Tuning to radio stations

1
Select TUNER source.
tU is displayed briefly.
2
Press SOURCE (TUNER) once or more to
select your waveband.
3
Press on TUNE à or á and release button.
The radio automatically tunes to a station
with sufficient reception. Display indication during
automatic tuning Srch.
4
Repeat step 3 if necessary until you find the
desired station.
To tune to a weak station, press TUNE à or
á briefly and repeatedly until you have found
optimal reception.
14

Programming radio stations

You can store up to a total of 30 (20 FW and
10 MW) radio stations in the memory.
Automatic programming
Automatic programming will start with a chosen
preset number 1. From this preset number
upwards, former programmed radio stations will
be overridden.
Press ¡ or ™ (on the remote control) to select
1
the preset number where programming should
start.
Note:
– If no preset number is selected, default is preset
(1) and all your presets will be overridden.
2
Press PROGRAM (PROG on the remote
control) for more than 2 seconds to activate
programming.
AUto is displayed and available stations are
programmed in order of waveband reception
strength.
Manual programming
1
Tune to your desired station (see Tuning to radio
stations).
2
Press PROGRAM (PROG on the remote
control) to activate programming.
flashes in the display.
PROG
3
Press à or á (on the remote control) to
select a number from 1 to 20 for FM (or 1 to
10 for MW) to this station.
4
Press PROGRAM (PROG on the remote
control) again to confirm the setting.
disappears and the frequency of the
PROG
preset station is shown.
5
Repeat the above four steps to store other
stations.
You can override a preset station by storing
another frequency in its place.

Tuning to preset radio stations

Press ¡ or ™ (on the remote control) until the
desired preset station is displayed.