Before Using The Remote Control; Replacing Battery (Lithium Cr2025) Into The Remote Control - Philips MC150 User Manual

FM Antenna
Extend coil antenna at the back of the unit fully
for optimum reception.
C
Speakers Connection
Front Speakers
Connect the speaker wires to the SPEAKERS
terminals, right speaker to "RIGHT" and left
speaker to "LEFT", coloured (marked) wire to
"+" and black (unmarked) wire to "-".
Fully insert the stripped portion of the speaker
wire into the terminal as shown.
Notes:
– For optimal sound performance, use the
supplied speakers.
– Do not connect more than one speaker to any
one pair of + / - speaker terminals.
– Do not connect speakers with an impedance
lower than the speakers supplied. Please refer to
the SPECIFICATIONS section of this manual.

Before using the remote control

1
Pull out the plastic protective sheet.
2
Select the source you wish to control by
pressing one of the source select keys on the
remote control (for example CD, TUNER).
3
Then select the desired function (for example
É, í, ë).
REPEAT SHUFFLE
Replacing battery (lithium
CR2025) into the remote control
A
1
Pull out the knob
2
Pull out the battery compartment
3
Replace a new battery and fully insert the
battery compartment back to the original
position.
PUSH
CAUTION!
Batteries contain chemical substances, so
they should be disposed off properly.
Preparations
VOL
SLEEP
slightly to the right.
B
.
PULL
9