Helmet Holder; Windshield [Xv17Atx(C)/Xv17Atsx(C)] - Yamaha Road Star XV17AWX Owner's Manual

INSTRUMENT AND CONTROL FUNCTIONS

Helmet holder

3
1. Helmet holder
The helmet holder is located under the
rider seat.
To secure a helmet to the helmet
holder
1. Remove the rider seat. (See page
3-11.)
2. Attach the helmet to the helmet
holder, and then securely install
the seat.
WARNING
Never ride with a helmet attached to
the helmet holder, since the helmet
may hit objects, causing loss of con-
trol and possibly an accident.
EAU14320 To release the helmet from the hel-
met holder
Remove the rider seat, remove the hel-
met from the helmet holder, and then
install the seat.
1
EWA10160
Windshield
[XV17ATX(C)/XV17ATSX(C)]
To suit the rider's preference, the wind-
shield angle can be adjusted and the
height can be changed to one of two
positions.
To adjust the windshield angle
1. Loosen the bolts on each side of
1. Windshield
2. Bolt
2. Move the windshield to the desired
3. Tighten the bolts to the specified
3-12
the windshield.
angle.
torque.
EAU14580