Clutch Lever - Yamaha Road Star XV17AWX Owner's Manual

has traveled both about 150 m (490 ft)
and for approximately 15 seconds.
However, the turn signal lights can also
be canceled manually by pushing the
switch in after it has returned to the cen-
ter position.
NOTE:
The self-canceling system only oper-
ates when the vehicle is moving, so that
the turn signal lights will not self-cancel
while you are stopped at an intersec-
tion.
Horn switch " "
Press this switch to sound the horn.
Engine stop switch " /
Set this switch to " " before starting
the engine. Set this switch to "
stop the engine in case of an emergen-
cy, such as when the vehicle overturns
or when the throttle cable is stuck.
Start switch " "
Push this switch to crank the engine
with the starter.
INSTRUMENT AND CONTROL FUNCTIONS
CAUTION:
See page 5-1 for starting instruc-
tions prior to starting the engine.
The engine trouble warning light will
come on when the key is turned to "ON"
and the start switch is pushed, but this
does not indicate a malfunction.
"SELECT" switch "
This switch is used to perform selec-
tions in the odometer, tripmeter, to set
EAU12500
the clock, and to set the brightness
mode of the multi-function meter unit.
See "Multi-function meter unit" on page
3-3 for detailed information.
EAU12660
"
"RESET" switch
" to
This switch is used to perform selec-
tions in the tripmeter, to set the clock,
and to set the brightness mode of the
multi-function meter unit.
See "Multi-function meter unit" on page
EAU12710
3-3 for detailed information.
ECA10050

Clutch lever

EAU41700
EAU42523
1. Clutch lever
/ "
The clutch lever is located at the left
handlebar grip. To disengage the
clutch, pull the lever toward the handle-
bar grip. To engage the clutch, release
the lever. The lever should be pulled
rapidly and released slowly for smooth
clutch operation.
EAU42532 The clutch lever is equipped with a
clutch switch, which is part of the igni-
tion circuit cut-off system. (See page
3-17.)
3-7
EAU12820
3