Getting Started; Finding The Correct Viewing Channel; Setting The Speakers - Philips HTS6600 User Manual

Getting Started

Finding the correct viewing
channel
A
Press SOURCE button on the main unit
until 'DISC SOURCE' appears on the
display panel (or DISC/USB on the
remote control).
B
Turn on the TV and switch it to the
correct video-in channel.
You may go to the lowest channel on
your TV, then press the Channel Down
button on your TVs remote control until
you see the Video In channel.
You may press ° button repeatedly
on your TVs remote control.
Usually this channel is between the
lowest and highest channels and may be
called FRONT, A/V IN, VIDEO, etc..
Refer to your TVs user manual on
how to select the correct input on your
TV.
Before you start ...
When you complete the connections and
turn on this unit to the 'DISC SOURCE'
mode for the fi rst time, you should see
the speaker setup message on the TV.
To optimize the Ambisound Surround effect for your
home environment, first set up your speakers correctly.
Go to the Speaker Setup in the Setup Menu.
Press 'SETUP' key on the Remote Control to continue.
Press 'STOP' to exit.
It is advisable that you make several basic
settings to optimise the performance of
this unit. See the following pages for
more information.
22

Setting the speakers

There are three parameters to adjust the
speakers: room acoustics, distance
between speakers and listening position.
Change the speaker settings according to
your room environment and setup.
A
In disc mode, press SETUP on the
remote control.
{ General Setup Page } menu
appears.
General Setup Page
Ambisound Setup
Disc Lock
Display Dim
OSD Language
Screen Saver
Sleep
DivX(R) VOD Code
B
Press cursor down key to highlight
{ Ambisound Setup } and press cursor
right key to select.
C
Select { Room Acoustics } and press
cursor right key.
Room Acoustics
Speaker Distance
Listening Position
D
Select the condition of the room and
press OK to confi rm.
{ Hard } for concrete or wood
surroundings.
{ Soft } for curtains or an open space
surroundings.
Hard
Soft