Subaru IMPREZA 1995 Service Manual page 9

WIRING DIAGRAM
11) Each connector number shown in the wiring diagram
corresponds to that in the wiring harness. The location of
each connector in the actual vehicle is determined by read-
ing the first character of the connector (for example, a "F"
for F8, "i" for i16, etc.) and the type of wiring harness.
The first character of each connector number refers to the
area or system of the vehicle, as indicated in table below.
Symbol
F
B
E
T
D
I
G6M0205
R
P
7
Wiring harness and Cord
Front wiring harness LH & RH
Bulkhead wiring harness
Engine wiring harness, Engine module wiring
harness
Transmission cord
Door cord LH & RH, Rear door adapter cord LH &
RH
Instrument panel wiring harness
Rear wiring harness, Rear defogger cord
Room light cord,
Fuel tank cord,
Sunroof cord,
Rear gate cord,
Rear gate lock adapter cord
Power window main harness
6-3
1. General Description