Table of Contents
Advertisement
WIRING DIAGRAM
8) The table below lists the nominal sectional areas and
allowable currents of the wires.
Nominal
sectional area
2
mm
0.3
0.5
0.75
0.85
1.25
2
3
5
8
CAUTION:
¼ When replacing or repairing a wire, be sure to use
the same size and type of the wire which was originally
used.
NOTE:
¼ The allowable current in the above table indicates the
tolerable amperage of each wire at an ambient tempera-
ture of 40°C (104°F).
¼ The allowable current changes with ambient tempera-
ture. Also, it changes if a bundle of more than two wires is
used.
9) Each unit is directly grounded to the body or indirectly
grounds through a harness ground terminal. Different sym-
bols are used in the wiring diagram to identify the two
grounding systems.
G6M0203
The ground points shown in the wiring diagram refer to the
following:
k
Body ground
GB
k
Engine ground
GE
k
Radio ground
GR
k
Rear defogger ground
GD
All wiring harnesses are provided with a ground point which
should be securely connected.
5
Outside
No. of strands/
diameter of
strand diameter
finished wiring
mm
7/0.26
1.8
7/0.32
2.2 (or 2.0)
30/0.18
2.6 (or 2.4)
11/0.32
2.4 (or 2.2)
16/0.32
2.7 (or 2.5)
26/0.32
3.1 (or 2.9)
41/0.32
3.8 (or 3.6)
65/0.32
4.6 (or 4.4)
50/0.45
5.5
6-3
1. General Description
Allowable
current
Amps/40°C
7
12
16
16
21
28
38
51
67
Hide quick links:
Advertisement
Table of Contents
