Table of Contents
Advertisement
USART Operation: UART Mode
Receive-Start Edge Detect Conditions
Figure 17−12. Glitch Suppression, USART Receive Not Started
URXDx
URXS
Figure 17−13. Glitch Suppression, USART Activated
URXDx
URXS
17-20
USART Peripheral Interface, UART Mode
When URXSE = 1, glitch suppression prevents the USART from being
accidentally started. Any low-level on URXDx shorter than the deglitch time t
(approximately 300 ns) will be ignored by the USART and no interrupt request
will be generated as shown in Figure 17−12. See the device-specific data
sheet for parameters.
t
τ
When a glitch is longer than
receive operation is started and a majority vote is taken as shown in
Figure 17−13. If the majority vote fails to detect a start bit the USART halts
character reception.
If character reception is halted, an active BRCLK is not necessary. A time-out
period longer than the character receive duration can be used by software to
indicate that a character was not received in the expected time and the
software can disable BRCLK.
Majority Vote Taken
t
τ
or a valid start bit occurs on URXDx, the USART
t
τ,
τ
Advertisement
Table of Contents
