Usb Communication Setting - LG AT&T GR500 Service Manual

11.2 USB Communication Setting

1) Configuration of USB communication
You should set as the following procedure to communicate between PC and the mobile phone
before you execute X-CALMON.
- Configure as Figure 11-1
- Connect USB cable instead of Serial cable
- Press the key button of the mobile phone : "8", "0" and "power key" simultaneously
- Check if LG logo disappear after LG logo display for a while
- Check if the EMP USB Modem driver is connected on the modem port of your PC
- Check the port of "Ericsson Mobile Platform EMPG USB WMC Modem" as follows
Copyright © 2009 LG Electronics. Inc. All right reserved.
Only for training and service purposes
Figure 11-2. USB modem driver Configuration
- 191 -
11. Stand-alone Test
LGE Internal Use Only