Table of Contents
Advertisement
CHAPTER 11 – ANALOG SOCKETMODEMS
Manufacturer
Littlefuse
ST Microelectronics
Recommended Poly Switch Thermal Fuse (SMT)
RayChem / Tyco Electronics
Recommended Poly Switch Thermal Fuse (Thru-Hole)
Meritek
RayChem / Tyco Electronics
The Fuse & Sidactor are required in order to comply with UL60950 for protection against over-voltages
Note:
from power line cross. Fuse can be reset type.
Common Mode Choke
TDK
Recommended Transceiver
Analog Devices
SIP Connector
Neltron Industrial Co. (http://www.neltron.com.tw/)
4-Pin 2.0mm SIP Socket (2 Each)
Note:
10-Pin 2.0mm SIP Socket (2 Each)
Telecom
The RJ-11 connector must meet FCC Part 68 requirements. Refer to FCC Part 68 section 68.500 subpart F for
connector specifications. A self-healing fuse is used in series with line to help prevent damage to the DAA circuit.
This fuse is required in order to meet compliance regulations.
Refer to Application Notes in the individual Device Guide for your model.
Note:
65
Part Number
P4202SCLRP
SMP100MC-400
TS600-170F
MPTH600V150M-MT
TRF600-150
ZJYS51R5-2PT-01
ADM207EARZ
2209S-XXG
Universal Socket Developer Guide
Advertisement
Table of Contents
