Philips FW585C User Manual page 15

Selecting the Equalizer
Display
You can select the desired equalizer display
for the system. You must not press the DSC
button on the system before using the JOG.
• Rotate the JOG to select the desired
Equalizer Display, NORMAL, TOP
DOWN, or NITE MODE.
™ The selected display will be shown.
NORMAL Display
PROGRAM SHUFFLE STEREO
BACK
REPEAT TIMER REC
FRONT HSD
NEWS T.A. AM MW FM LW
60Hz 250Hz 500Hz 2KHz 4KHz 8KHz
1KHz
TOP DOWN Display
PROGRAM
SHUFFLE STEREO
BACK
REPEAT TIMER REC
FRONT HSD
NEWS T.A. AM MW FM LW
60Hz 250Hz 500Hz 2KHz 4KHz 8KHz
1KHz
NITE MODE Display
PROGRAM SHUFFLE STEREO
REPEAT TIMER REC BACK
FRONT HSD
NEWS T.A. AM MW FM LW
60Hz 250Hz 500Hz 1KHz 2KHz 4KHz 8KHz
Note:
– In NITE MODE, all lights will be
switched off and the display brightness
will be dimmed.
Sound Control
VOLUME ADJUSTMENT
Adjust VOLUME to increase or decrease
the sound level.
For Personal Listening
Connect the headphones plug to the n
socket at the front of the system. The
speakers will be muted.
DIGITAL SOUND CONTROL (DSC)
The DSC feature enables you to adjust the
system to suit your type of music.
• Press DIGITAL SOUND CONTROL
(DSC) to select OPTIMAL, CLASSIC,
TECHNO, JAZZ , ROCK or VOCAL.
™ The selected digital sound is
encircled.
™ "OPTIMAL X, CLASSIC,
TECHNO X, JAZZ X, ROCK
X or VOCAL X" will be displayed.
"X" is the pre-selected level.
You can change the digital sound setting
level for all but CLASSIC with the JOG.
• First select the DSC feature, then rotate
the JOG until the desired digital sound
setting level is reached.
™ The digital sound setting level will
increase or decrease between level 1
and 5.
Note:
– For neutral setting, select CLASSIC and
switch off DBB.
DYNAMIC BASS BOOST (DBB)
There are three DBB settings to enhance
the bass response.
• Press DBB briefly to select a bass boost
level.
™ The respective DBB level is being
encircled and lit.
™ "BEAT, PUNCH or BLAST" will
be displayed.
To switch off DBB
• Press DBB briefly until "DBB OFF" is
displayed.
Note:
– Some CDs or tapes might be recorded in
high modulation. It may cause a
distortion at high volume. If this occurs,
switch off DBB or reduce the volume.
OPERATING THE SYSTEM
Automatic DSC-DBB selection
The best DBB setting is generated
automatically for each DSC selection. You
can manually select the DBB setting that
best suits your listening environment.
15