Installing And Removing A Storage Controller - Intel MFSYS25 User Manual

4. Replace the switch module with a filler panel or another Ethernet switch module
within two minutes.

Installing and Removing a Storage Controller

The Intel
installed; optionally, a second storage controller may be installed in the open storage
controller bay.
Installing a Storage Controller
1. Review the safety and ESD information at the beginning of this manual and in the
appendices.
2. Locate an available storage controller bay and remove any installed module or filler
panel.
3. Release and rotate the module retention lever out and away from the storage controller
(see letter "A" in the following figure). Slide the storage controller into the selected
module bay (see letter "B") until the bottom of the retention lever engages with the
module bay.
Intel® Modular Server System MFSYS25 User Guide
®
Modular Server System MFSYS25 ships with one storage controller pre-
19