Docking Device Connector Door - Dell Latitude E6400 XFR Setup And Features Information

™
Dell Latitude™ E6400 XFR Setup and Features Information

Docking Device Connector Door

The docking device connector door is opened by sliding the door towards the front of the computer
until it clicks into its open position. Reverse this procedure to close the door.
Press-Fit Door
The press-fit door is opened by inserting a finger into the door slot and pulling the door away from the
computer. To close the door, rotate it back into its closed position and press until it you hear it click
into position.
Latch Door
The latch door is opened by sliding the latch towards the rear of the computer, and then rotating the
door down. To close the door, rotate the door back into its closed position and press until you hear it
click into position.
Page 7 01/08/09