Touchkit Configuration Utility; Accessing Drivers And Documentation - Dell Latitude E6400 XFR Setup And Features Information

Dell
CAUTION: The optional DirectVue
touch as well as passive stylus input directly onto the screen.
TM
DirectVue Touch Display, a stylus is included with the E6400 XFR for use in
selecting items on the touch screen.
touch screen such as any non-abrasive, smooth or blunt object that will not damage
the touch screen display. The touch screen surface can be damaged by ink pens,
marker pens or other pointed or abrasive objects. The use of non-approved input
devices that cause damage to the digitizer or LCD may not be covered by the limited
warranty.
The touch screen is pre-configured and pre-calibrated at the factory, but may require further
calibration to improve accuracy for entering or selecting data on the touch display. Please see the
T ools section for information on Calibrating your E6400 XFR Touch Display and using your stylus.
3

Accessing Drivers and Documentation

Your E6400 XFR DirectVue Touch Display's drivers, touch-input parameters and documentation have
been pre-loaded at the factory. For experienced users or IT administrators - if you need to re-install
drivers, set up your E6400 XFR Touch Display or modify parameters please refer to the pre-loaded
E6400 XFR Touchkit Utility documentation for detailed instructions and refer to the summary provided
in T ouchkit Configuration Utility.
4
You can launch the pre-loaded documentation by selecting Start -> Programs -> Touchkit ->
Document.

Touchkit Configuration Utility

Your E6400 XFR DirectVue Touch Display system incorporates EETI technology. Touchkit is a software
utility tool that allows you to configure various touch features. You can launch Touchkit by clicking
Start -> Programs -> Touchkit -> Configure Utility.
NOTE: The touch screen is pre-configured and pre-calibrated at the factory, but may require
further calibration to improve accuracy for entering or selecting data on the touch display, or to
further configure it to your specific application.
Please refer to the pre-loaded documentation for the Touchkit Configuration Utility for a complete
description of all its capabilities and functionality.
You can launch the pre-loaded documentation for the Touchkit Configuration Utility by selecting
Start -> Programs -> Touchkit -> Document -> User Guide for Windows 2000/XP ->
Touchkit Utility.
The Touchkit software utility consists of tabs that allow you to determine the best settings for your
touch screen configuration.
• The G eneral tab shows all of the touchkit touch screen controllers installed in your system
5
• The T ools tab provides access to calibration and touch position tools.
6
• The S etting tab provides access to the configuration of beeps, clicks and mouse emulation as
7
well as selection of 9 point or 25 point calibration for linearization.
• The D isplay tab provides the tools for mapping the touch screen area to specific areas of the
8
display. The default is full screen.
• The E dge Parameters tab provides configuration for selecting items near the edge of the
9
touch screen.
• The H ardware tab provides the model and firmware version of the Touchkit touch screen
1
controller.
• The A bout tab provides the version of the Touchkit driver as well as providing a link for
1
downloading the latest driver.
Page 11
™
Latitude™ E6400 XFR Setup and Features Information
TM
Touch Display has been designed to accept finger
Other pointing devices can be used with the
With the optional
01/08/09