Using Range Extender Settings - Linksys re4100w User Manual

1. Open Windows Explorer (File Explorer in Windows 8). Click
icon on the right panel. (You might be required to change the firewall settings to allow the
display of networked computers. Refer to your operating system's help for instructions.)
2. Right-click the RE4100W icon. Click Properties. Click on the address link in Device
webpage. A web browser will open and prompt you to enter a User name and Password.
3. Leave the User name blank, and enter the default password "admin."
4. Click OK.
Mac OS X:
1. Open Safari. Click the book icon. Click Bonjour on the left panel. Look for the RE4100W
icon on the bottom right panel.
2. Double-click the RE4100W icon.
3. Leave the User name blank, and enter the default password "admin."
4. Click OK.

Using range extender settings

Click Help on the right side of the screen for additional information on the screen's
options.
Changes to settings will not be effective until you click Save Settings at the bottom of
the screen. You also can click Cancel Changes to clear any changes.
Network. Look for the RE4100W