Assembly Of Items Inside The Magnum Pro Spool Gun - Lincoln Electric K3269-1 Operator's Manual

ASSEMBLY OF ITEMS INSIDE THE MAGNUM
Machine Connections
1. Liner Assembly feeds all specified
wire.
2. Drive Roll: This Drive Roll feeds all
specified wires.
3. Idle Roll Assembly: Non-adjustable
tension setting for all specified wires
4. Incoming Wire Guide: Highly wear-
resistant.
5. P6 Connector Control Leads: Motor
Power and
Maintenance Section for more
details)
6. Welding Power and Shielding Gas
Machine connection (Sealed with 2
o-rings).
INSTALLATION
FIGURE A.3
2
3
8
1
MASTER KEY
6
Trigger. (See
TOP vIEW 4
1 1
3 3
2 2
4 4
P6 CONNECTOR PINOUT
7. Locking Knob: Independently retains
the wire spool on the spindle.
8. Liner Assembly: Includes a gas seal
with the cable connector and is the
outgoing wire guide.
9. Only 4 sub-assemblies: gun tube;
cable; wire drive; trigger.
10. Conical spring (not shown) serves
as the spool brake (use only with
aluminum alloy 5356).
A-3
® PRO SPOOL GUN
9
Spool Cover and left
handle removed
7