Push Buttons; Display - Panasonic EBL128 Daily User's Manual

2.2. PUSH BUTTONS

See reference picture on page 4.
17 Fault acknowledge
18 Paper feed
19 Access
20 Return
21 C
22 Key pad
23 A
24 Left / right keys
25 Up / down keys
26 Alarms queued
27 Evacuate / Test LED
28 Reset
29 Silence Alarm devices
30 Silence buzzer

2.3. DISPLAY

See reference picture on page 4.
31 Display
DAILY USER´S MANUAL
Used to acknowledge the faults shown in menu H6. Also used to
acknowledge SERVICE signal, see menu H8/S4.
Not used in EBL128.
Used to log on and get access to the menu.
Used to stop input of data, leave a menu ("one step up") and to log off.
Used to clear /delete just written data.
Numeric key pad for the digits 0-9.
Used to accept / select a menu or input of data.
Used to move the cursor in a menu.
Used to scroll between the menus.
Used when LEDs "Alarms queued" are lit. Scroll through the queued alarm
points or zone addresses.
Used to activate all the sounders or test LED. (Option, only available for
some countries and conventions.)
Used to reset the fire alarms. Has to be pressed for > 0.5 sec.
Used to silence the alarm devices.
May be configured to disable alarm devices.
Used to silence the buzzer in the EBL 128 when it is sounding.
This is the information the display will show in normal operation state.
 The user programmable information text is created via EBLWin.
 In normal operation and in quiescent state, the LCD-backlight will
be turned off.
 As soon as any other information is shown in the display, the
backlight is turned on.
6
• •
EBL128 VERSION 2.2.X DOCUMENT NUMBER: MEW01786
•
REVISION: 1