Hard Disk Drive - Panasonic CF-18 Series Reference Manual

Hard Disk Drive

To change your hard disk drive, contact Panasonic Technical Support
Inserting/Removing the Hard Disk Drive
Latch
Cover
CAUTION
Be sure to back up all impor tant data before changing the hard disk drive.
You can erase the data before changing the hard disk drive.
( "Hard Disk Data Erase Utility")
If [Hard Disk Lock] is set to [Enable] in the Setup Utility, change this to [Disable]
before changing the hard disk drive.
Be careful when changing the hard disk drive. The hard disk drive is extremely
sensitive to shock. In addition, static electricity could later affect some internal
components.
1
Power off your computer.
Do not shut down using the standby or hibernation mode.
Disconnect the AC adaptor.
2
Remove the battery pack.
3
Removing the hard disk drive
Unlock the cover by sliding the latch to the right.
Slide the latch down, and then without releasing it, open the cover
as illustrated.
Pull the tab on the hard disk drive and remove it from the computer.
Tab
( "Starting Up/Shutting Down")
( page 40)
(To next page)
61