Honda HRX537HXEA Owner's Manual page 5

Throttle Lever
The throttle lever
[1] controls the
following functions:
HXEA

CHOKE For starting a cold engine.

FAST For starting a warm engine and for mowing.

SLOW For idling the engine.

For stopping the engine. (HMEA type; Turn the
STOP
key switch OFF to stop the engine.)
Engine Switch [1] (HMEA type)
OFF Stops the engine.
ON Running position (the
key switch must be in
the ON position to use
the recoil starter).
START Operates the electric
starter.
Blade Control Lever
The button [1] and blade
control lever [2] start and
stop blade rotation.
Drive Clutch Lever
The drive clutch lever [1]
engages and disengages
the transmission.
[1]
HMEA
[1]
[2]
[1]
[1]
ENGLISH
Shift Lever
The shift lever [1] selects and controls the mower's drive
speed.
With the shift lever [1] all the
way back [A] and the drive
clutch lever engaged, the
mower will move slowly or
not at all. Use a slow speed
for mowing thick grass or
maneuvering in small areas.
Use position [B] for maxi-
mum self-propelled speed in
large, open areas, and for
transport.
Cutting Height Adjustment Levers
There are seven
adjustment settings. The
cutting height figures are
approximate. The actual
height of cut grass will vary
with lawn and soil
conditions.
There is one adjustment
lever [1] for each wheel.
Clip Director Knob
The Clip Director knob [1]
controls bagging, mulching,
and rear discharge. The
knob has ten adjustment
positions.
[A]
[1 ]
20 mm
32 mm
46 mm
62 mm
75 mm
88 mm
100 mm
[1]
[1]
[B]
5