Software Maintenance; Software List; Checking Software Version Of System Program; Checking Software Version Of Rap - Furuno VR-3000 Operator's Manual

2.3 Software Maintenance

2.3.1 Software list

The software and software version of the VR-3000/VR-3000S are as shown in the table below.
Software name
VR-3000 System Program
VR-3000 RAP

2.3.2 Checking software version of system program

Follow the procedure below to check software version of system program.
1. Start up a PC that uses Windows XP or Windows 2000 OS.
2. Change the IP address to 10.0.0.102 and the subnet address to 255.0.0.0.
3. Connect the cross LAN cable (supplied) between the LAN port on the PC and J14 (Data) in
the DCU of the VR-3000/VR-3000S.
4. Start up the VDR Maintenance Viewer from the PC.
5. Select Guest and click OK.
6. Open the menu of this program from the Tool/Status Monitor.
7. The program version is displayed at the right side of the VDR VERSION.

2.3.3 Checking software version of RAP

Push and hold down the RAP's plus and minus buttons together. A three-digit number appears
(for example, "101") and these digits are the version number.
10
VR-3000/VR-3000S software list
Software version
2450031-02
2450026-01
Date
July 2008
Mar 2006