Sony SA-VA100 Operating Instructions Manual page 33

Locating a track directly
1
Click SUB
D
1 2 3
DISC
TIME DISC–2 *
*
0 ( )
This function is only available when the CD player is
set to the CONTINUE play mode.
If PROGRAM or SHUFFLE appear in the SUB menu,
click them repeatedly to select "CONTINUE".
2
Click CALENDAR
SUB
ALL DISCS
CONTINUE
1 2 3
DISC
TIME
DISC–2 *
*
0 ( )
3
Click the icon for the track you desire.
CALENDAR
1 2 3
6 7 8
11 12 13 14
RETURN
1 2 3
DISC
TIME
DISC–2 *
*
0 ( )
To display track numbers not shown on the current
CD calendar (for CDs with more than 20 tracks).
Click the > or . icon located next to the CD calendar.
To return to the previous menu.
Click RETURN or press RETURN on the remote control.
To exit to the main menu.
Click EXIT or press EXIT on the remote control.
Locating a track directly without using the on-screen
display
Press the numeric button on the remote for the track
you want. If the track number is greater than 10, press
>10 and the track number.
e.g. For track number 21, press >10, 2, 1.
For track number 20, press >10, 2, 10/0.
MEMO SUB
4 5 6 7
p P = +
CALENDAR
EXIT
MEMO SUB
4 5 6 7
p P = +
V
4 5
9 10
15
v
EXIT
MEMO SUB
4 5 6 7
p P = +
Operating the CD Player Using OSD
Locating a particular point in a track
You can locate a particular point in a track while
monitoring the sound or quickly by observing the
display.
To
Go forward quickly
Go backwards quickly
Search quickly by observing
the display during pause
Checking the remaining or total playing
time
Click TIME.
D
1 2 3
DISC
TIME 2–1
(
0 ( )
Each time you click TIME while playing a CD, the
display changes as follows.
Playing time on current track
Remaining time on current track
Remaining time on CD (normal play only)
Notes
• You can also check the remaining time on the current track
during shuffle, and program play.
• The total playing time and number of tracks for the
current disc appear in the display if you wait a few
seconds after pressing § OPEN/CLOSE on the front of
the right speaker to close a disc tray.
Click and hold down
) and release it at the
desired point.
0 and release it at the
desired point.
0 or ) until you find
the desired point. You
will not hear the sound
during this operation.
MEMO SUB
4 5 6 7
0.21
p P = +
33