3.
For details on how to configure the switch using the command line interface, refer to the
Enterasys B5 CLI Reference. The CLI commands enable you to set a new password and perform
more involved management configurations on the switch. One of many capabilities is to
reconfigure the stack, reassigning the Manager function to another switch and configuring the
order of Member switches that will take over the stack management functions in case the
operating Manager is powered down, malfunctions, or is removed from the stack.
4.
After the initial configuration, you can also use WebView (Enterasys Networks' embedded
web server) for configuration and management tasks.
All the guides associated with the switch are available online at:
http://www.enterasys.com/support/manuals
Once you are confident that the installation is successful, route and secure your cables. If you
require assistance, contact Enterasys Networks using one of the methods described in "Getting
Help" on page xvii.
Enterasys B5 Gigabit Ethernet Switch Hardware Installation Guide 2-31
Completing the Installation