Starting Up; Installing The Battery; Inserting The Sim Card - Zte F953 User Manual

Starting Up

Installing the Battery

Notes:
The phone automatically switches off if the battery power is too low.
If you are not going to use the battery for a long time, remove it from the phone and store it
in a cool dry place.
1. Press and hold the Power Key to turn off the phone.
2.
Use the thumb catch at the bottom of the handset to open the battery cover.
3.
Insert the battery carefully with the contacts located against the gold springs.
4.
Press the battery down flush into the case.
5.
Line the battery cover up correctly and press gently to close the case.
Caution:
Do not force the battery cover into place by pressing on it. Doing so will damage the battery
cover.

Inserting the SIM card

You can obtain a SIM card from your service provider when you sign on as a subscriber.
Caution:
Do not bend or scratch your SIM card. Keep the card away from electricity and magnets.
Do not touch the metal surface of the SIM card. Doing so could cause information on the
card to be lost or destroyed.
Make sure to disconnect the charger and other accessories from your phone and remove the
battery before inserting and removing your SIM card.
1. Press and hold the Power Key to turn off the phone.
2. Use the thumb catch at the bottom of the handset to open the battery cover.
3. Insert the SIM card with the gold contacts facing down and the beveled edge on the top left as shown.
4. Carefully slide the card holder and push it until it clicks into position.
8 Confidential and Proprietary Information of ZTE CORPORATION