Home Leave Operation - Daikin B-Series Service Manual

Si12-714
2.11

HOME LEAVE Operation

HOME LEAVE Operation

HOME LEAVE operation is a function which allows you to record your preferred temperature and air
flow rate settings.
To start HOME LEAVE
operation
1. Press "HOME LEAVE button" .
• The HOME LEAVE lamp lights up.
OFF
To cancel HOME LEAVE
operation
2. Press "HOME LEAVE button" again.
• The HOME LEAVE lamp goes off.
Before using HOME LEAVE operation.
To set the temperature and air flow rate for HOME LEAVE operation
When using HOME LEAVE operation for the first time, please set the temperature and air flow rate
for HOME LEAVE operation. Record your preferred temperature and air flow rate.
Cooling
Heating
1. Press "HOME LEAVE button". Make sure "
display.
2. Adjust the set temperature with "
3. Adjust the air flow rate with "FAN" setting button as you like.
Home leave operation will run with these settings the next time you use this function. To change
the recorded information, repeat steps 1 – 3.
Operation Manual
ON
Initial setting
temperature Air flow rate
25°C
25°C
HOME LEAVE
POWERFUL
MODE
QUIET
Selectable range
temperature
" " 18-32°C
" " 10-30°C
" is displayed in the remote control
" or " " as you like.
C
1, 2
ON/OFF
TEMP
FAN SWING
SENSOR
Air flow rate
5 step, " " and " "
5 step, " " and " "
Instruction
137