Cisco Catalyst 4500 Series Software Configuration Manual page 1360

Configuring 802.1X Port-Based Authentication
Dot1x Info for GigabitEthernet7/2
-----------------------------------
PAE
PortControl
ControlDirection
HostMode
QuietPeriod
ServerTimeout
SuppTimeout
ReAuthMax
MaxReq
TxPeriod
Dot1x Authenticator Client List
-------------------------------
Supplicant
Session ID
Auth SM State
Auth BEND SM State
Port Status
To determine if a host was authenticated using MAB when fallback authentication is configured on the port, enter the following
commands:
Switch# show authentication sessions interface g7/2
Interface:
MAC Address:
IP Address:
User-Name:
Status:
Domain:
Oper host mode:
Oper control dir:
Authorized By:
Vlan Policy:
Session timeout:
Idle timeout:
Common Session ID:
Acct Session ID:
Handle:
Runnable methods list:
Method State
dot1x Failed over
mab Authc Success
Switch# show mab interface g7/2 detail
MAB details for GigabitEthernet7/2
-------------------------------------
Mac-Auth-Bypass
MAB Client List
---------------
Client MAC
Session ID
MAB SM state
Auth Status
Catalyst 4500 Series Switch, Cisco IOS Software Configuration Guide - Cisco IOS XE 3.9.xE and IOS 15.2(5)Ex
49-80
= AUTHENTICATOR
= AUTO
= Both
= MULTI_AUTH
= 60
= 0
= 30
= 2
= 2
= 2
= 0060.b057.4687
= C0A8013F0000000901BAB560
= AUTHENTICATED
= IDLE
= AUTHORIZED
GigabitEthernet7/2
0060.b057.4687
192.168.22.22
0060b0574687
Authz Success
DATA
multi-auth
both
Authentication Server
N/A
N/A
N/A
C0A8013F0000000B01BBD278
0x0000000D
0xF500000B
= Enabled
= 0060.b057.4687
= C0A8013F0000000B01BBD278
= TERMINATE
= AUTHORIZED
Chapter 49 Configuring 802.1X Port-Based Authentication