Synchronise Data - Nokia N91 User Manual

Applications—Select the applications to synchronize
with this profile, Contacts
Scroll to each application and press the joystick to
define its synchronization settings:
•
Include in sync—Select
synchronise the application.
•
In Remote database, enter a correct path to the
remote calendar, address book, or database on the
server.
•
Select Synchronisat. type:
synchronisation), To server
•
Connection settings—Define the following.
Contact your service provider or system
administrator for the correct values.
•
Server version—Select the SyncML version the
synchronization server uses. You must select
synchronize e-mail.
• Server ID—Enter the server ID for the e-mail server
(shown only if Server version
• Data bearer—Select the connection type: Internet,
or Bluetooth.
•
Access point (shown only if
Internet)—Select an access point to use for the data
connection.
• Host address—The IP address of the host server.
•
Port—The server port number (shown only if
bearer is set to Internet).
and Calendar, for example.
Yes if you want to
Normal (two-way
only, or To phone only.
1.2 to
is set to 1.2).
Data bearer is set to
Data
Copyright © 2006 Nokia. All rights reserved.
• User name—Your user ID for the synchronisation
server.
• Password—Your password for the synchronization
server.
•
Allow sync requests—Select
allow the server to start a synchronization.
•
Accept all sync reqs.—Select
device to ask you before a synchronization initialised
by the server is started.
•
Network authentic.
set to Internet)—Select
name and password. Scroll down to view the user
name and password fields.
3
Select Back to save the settings and return to the main
view.

Synchronise data

In the Sync main view, you can see the different
synchronization profiles and the kind of data to be
synchronized.
1
Select a synchronization profile and
Synchronise. The status of the synchronization is
shown at the bottom of the screen.
To cancel synchronization before it finishes, select
Cancel.
2 You are notified when the synchronization is complete.
After synchronization is complete, select
Yes if you want to
No if you want your
(shown only if Data bearer
Yes to enter a network user
Options >
Options
is
>
87