Settings - Nokia N91 User Manual

Settings

Press , and select
open the application for the first time, you are asked to
define a name for your device. After you set Bluetooth
connectivity on and change
Shown to all, your device and this name can be seen by
other users with devices using Bluetooth technology.
Select from the following:
Bluetooth—Select
another compatible device, first set Bluetooth connectivity
On, then establish a connection.
My phone's visibility—To allow your device to be found by
other devices with Bluetooth technology, select
all. To hide it from other devices, select Hidden.
My phone's name—Edit the name of your device.
Remote SIM mode—To enable another device, such as a
car kit enhancement, to use the SIM card in your device to
connect to the network, select On.
The remote SIM mode
To use the remote SIM mode, set Bluetooth connectivity
on, and enable the use of the remote SIM mode with your
device. Before the mode can be activated, the two devices
must be paired and the pairing initiated from the other
device. When pairing, use a 16-digit passcode, and set the
82
Connect. > Bluetooth. When you
My phone's visibility
On or Off. To connect wirelessly to
Copyright © 2006 Nokia. All rights reserved.
other device as authorized. See
The remote SIM mode is activated from the other device.
When remote SIM mode is on in your Nokia N91,
SIM is displayed in the standby mode. The connection to
the wireless network is turned off, as indicated by
to
the signal strength indicator area, and you cannot use SIM
card services or features requiring cellular network
coverage.
Warning: In the remote SIM mode, you cannot
make or receive any calls with your device, except
make calls to certain emergency numbers, or use
other features that require network coverage.
To make calls, you must first leave the remote SIM
mode. If the device has been locked, enter the lock
Shown to
code.
To leave the remote SIM mode, press the power key,
and select Exit rem. SIM
Security tips
When you are not using Bluetooth connectivity, select
Bluetooth >
Operating the phone in hidden mode is a safer way to avoid
malicious software.
Do not pair with an unknown device. Do not accept
Bluetooth connectivity from sources you do not trust.
"Pair devices", p. 83.
mode.
Off or My phone's visibility
Remote
in
> Hidden.