Device Repair - Philips audio players User Manual

Device Repair

Your device is controlled by an internal program called firmware. In case your device has a problem,
or you wish to format the device, you may need to repair it.
TIP
Please charge your device fully before device repair. This will ensure
steady power supply for completing the whole process.
1 Connect your device to your computer (powered by the supplied AC/DC adapter if
applicable).
2 Launch Device Manager User Interface by right-clicking on this
taskbar and selecting "Launch Device Manager" or by going to
Start Programs
3 In the main window, go to the repair tab and click Repair.
4 You will be prompted before repair begins.
ATTENTION!
All media contents will be erased!
5 Click OK to continue. Click Cancel to stop.
6 The Device Manager will repair your device. Once the repair is complete,
the device can be used again.
Your device will be automatically disconnected as soon as Device Manager finishes interacting
with your device and will get connected back to the PC after the repair is complete.
32
Philips Device Manager
icon in the