Related Manuals for Philips Fidelio E6
Summary of Contents for Philips Fidelio E6
-
Page 1: User Manual
Wireless satellite speakers and subwoofer User manual Always there to help you Question? Contact Philips Register your product and get support at www.philips.com/support... -
Page 2: Table Of Contents
Contents 1 Important 6 Use your product Safety Adjust the volume Care for your product Choose your sound Care of the environment MP3 player Compliance USB storage devices Help and support Play music via Bluetooth Open source software Connect Bluetooth via NFC Auto standby 2 Your product Set display brightness... -
Page 3: Important
1 Important back or bottom of the product. Never connect the product to the power outlet if the voltage is different. Risk of injury or damage to this product! Read and understand all instructions before you • Never place the product or any objects use your product. If damage is caused by failure on power cords or on other electrical to follow instructions, the warranty does not equipment. -
Page 4: Care For Your Product
This is CLASS II apparatus with double We strongly advise you to take your product to insulation, and no protective earth provided. an official collection point or a Philips service centre to have a professional remove the rechargeable battery. Care for your product... -
Page 5: Help And Support
Help and support For extensive online support, visit Congratulations on your purchase, and www.philips.com/support to: welcome to Philips! To fully benefit from the • download the user manual and the quick support that Philips offers, register your product start guide at www.philips.com/welcome. -
Page 6: Remote Control
f NFC tag Remote control g Red/white/orange LEDs Red LED This section includes an overview of the • Lights up when this product is in remote control. ECO standby (not connected to the network). White LED • Blinks when this product is not connected to the network, or when connection error occurs. -
Page 7: Wireless Surround Speakers
HDMI 1: Switch your source to the • HDMI IN 1 connection. Increase or decrease audio delay. • HDMI 2: Switch your source to the HDMI IN 2 connection. Turn night mode on or off. COAX: Switch your audio source to •... -
Page 8: Wireless Subwoofer
Blinks red when the battery capacity is • Wireless subwoofer less than 10% remaining. • Lights up orange when the surround This product comes with a wireless subwoofer. speaker is being charged (only for the surround speakers docked onto the main unit). -
Page 9: Connectors
Connectors Connect to the ethernet port on a broadband modem or router. This section includes an overview of the e HDMI IN 1 connectors available on this product. Connect to the HDMI output on a digital device. On the left base speaker In case of no response from the surround speaker, press and hold with a pin for 5 seconds to reset this product to the... -
Page 10: Connect And Set Up
3 Connect and set » The network setup prompt is displayed on the display panel of this product. » The white LED on the right base speaker blinks. • To initialize network setup, see “Google Cast™ and Spotify Connect”. This section helps you connect this product to a •... -
Page 11: Manual Pair-Up With The Main Unit
Manual pair-up with the main unit The wireless speakers and subwoofer WOOFER automatically pair up with the main unit (left and right base speakers) for wireless connection when you turn on the main unit, the speakers and the subwoofer. If audio from the main unit cannot be heard through the wireless speakers and subwoofer, manual pair up with the main unit is required. -
Page 12: Connect Audio From Tv
Dock the surround speakers You can also dock your surround speakers onto the main unit to listen to audio, for example, watching TV shows and news. Using a High Speed HDMI cable, connect the HDMI OUT (ARC) connector on this product to the HDMI ARC connector on the TV. -
Page 13: Connect Audio From Other Devices
Using an analog cable, connect the AUDIO Using an optical cable, connect the OPTICAL connector on this product to IN (3.5mm jack) on this product to the the optical output on the TV. analog audio output (red and white) on •... -
Page 14: Connect Digital Devices Through Hdmi
Press AUDIO IN on the remote control Option 2: Connect to other device of this product to enable the analog audio through coaxial cable connection. » AUX is displayed on the display panel Best quality audio of this product. Connect digital devices through HDMI Connect a digital device such as a set-top box, DVD/Blu-ray player, or games console to this... -
Page 15: Google Cast™ And Spotify Connect
Connect this product to stream music from online Google Cast and network Spofity Connect services to this product. Launch Philips “HCWeSet” app on your To use Google Cast and Spotify Connect mobile device. services, you need to setup the network to Go to the App home page. -
Page 16: Navigate The App Home Menu
Navigate the App home menu wireless surround speakers with respect to your seating position. Launch Philips “HCWeSet” app on your The spatial calibration involves two steps. mobile device. Step 1: calibrate the listening zone •... -
Page 17: Step 1: Calibrate The Listening Zone
Step 1: calibrate the listening Step 2: calibrate the surround zone speaker position This step is to optimize surround experience This step is to optimize surround experience through balance of your seating position. through balance of the placement of wireless surround speakers. -
Page 18: Use Your Product
6 Use your Note product • Spatial calibration takes around three minutes. • Surround sound improvement is only noticeable if the wireless surround speakers were improperly placed, or if there is strong surround effect in the music you play. • If the wireless surround speakers are swapped in This section helps you use this product to play placement, at the end of calibration L<->R is displayed... - Page 19 • Press to create sound effect Press to synchronize which makes human voice more clear and the audio with the video. outstanding for listening. • increases the sound • Press to automatically select a delay, and decreases predefined sound mode ( the sound delay.
-
Page 20: Mp3 Player
• : play randomly in MP3 player one folder. • : exit repeat or shuffle Connect your MP3 player to play your audio play mode. files or music. What you need Note • An MP3 player. • This product may not be compatible with certain types •... - Page 21 Bluetooth device on how to enable Bluetooth). Select and play audio files or music on • Philips E6 -L stands for the left your Bluetooth device. surround speaker, Philips E6 -R for the • During play, if a call is coming, right surround speaker.
- Page 22 On the Bluetooth device, switch on Note Bluetooth, search for and select Philips • The function of the remote control is not available to E6 L to connect the left surround speaker this feature.
-
Page 23: Connect Bluetooth Via Nfc
Auto standby Note • The function of the remote control is not available to Networked standby this feature. When this product is connected to the network, this product automatically switches to networked standby after 15 minutes of inactivity. Connect Bluetooth via NFC Networked standby shortens the startup time from standby, optimized for streaming music from mobile apps. -
Page 24: Update Software
When the factory settings restore is complete, the product automatically switches off and restarts. To get the best features and support, update your product with the latest software. Option 1: Launch Philips "HCWeSet" app on your Note mobile device. • Make sure that you connect this •... -
Page 25: Update Software Via Usb
Select the name of this product, then select Launch Philips "HCWeSet" app on your "Software Update" > "Network". mobile device. • Make sure that you connect this Follow the on-screen instructions to product to the network. complete the update. » During upgrade, “UPG XX” (upgrade) Go to the App home page. -
Page 26: Product Specifications
8 Product Bluetooth specifications • Bluetooth profiles: A2DP, AVRCP, • Bluetooth version: Bluetooth V4.1 with Bluetooth Low Energy Note Main unit (left and right base speakers) • Specifications and design are subject to change without • Power supply: 110-240 V~, 50-60 Hz notice. -
Page 27: Troubleshooting
If you have problems using this product, check the NFC tag (if available). the following points before you request service. If you still have a problem, get support at www.philips.com/support. Main unit The buttons on this product do not work. •... - Page 28 The connected Bluetooth device connects and • If you intend the wireless surround speaker disconnects constantly. to wirelessly connect to the main unit, make sure that you press the SOD button • The Bluetooth reception is poor. Move the on the wireless surround speaker. device closer to this product, or remove •...
- Page 29 Spatial calibration Why spatial calibration is needed? • Spatial calibration optimizes surround sound experience if your portable left and right speakers (surround) are not properly placed. Improvement in surround sound is not noticeable after successful spatial calibration. • Surround sound improvement is only noticeable if the portable left and right speakers (surround) were improperly placed, or if there is strong surround effect...
- Page 30 Google Cast and the Google Cast badge are Manufactured under license from Dolby trademarks of Google Inc. Laboratories. Dolby, Pro Logic, and the double-D symbol are trademarks of Dolby Laboratories. The Spotify Software is subject to third party licenses found here: www.spotify.com/connect/ third-party-licenses.
- Page 31 Acknowledgements for any open Foundation’s software and to any other program whose authors commit to using it. (Some other Free Software Foundation software is source software used in this Philips covered by the GNU Library General Public License instead.) You can product apply it to your programs, too.
- Page 32 You may charge a fee for the physical act of transferring a work, complete source code means all the source code for all copy, and you may at your option offer warranty protection in modules it contains, plus any associated interface definition files, exchange for a fee.
- Page 33 If the distribution and/or use of the Program is restricted in To do so, attach the following notices to the program. It is safest to certain countries either by patents or by copyrighted interfaces, attach them to the start of each source file to most effectively convey the original copyright holder who places the Program under this the exclusion of warranty;...
- Page 34 4. Libnl, nopoll, nss-mdns, xz General Public License therefore permits such linking only if the entire combination fits its criteria of freedom. The Lesser General GNU LESSER GENERAL PUBLIC LICENSE Public License permits more lax criteria for linking other code with Version 2.1, February 1999 the library.
- Page 35 constitute a work based on the Library (independent of the Once this change is made in a given copy, it is irreversible for use of the Library in a tool for writing it). Whether that is true that copy, so the ordinary GNU General Public License applies depends on what the Library does and what the program that to all subsequent copies and derivative works made from that uses the Library does.
- Page 36 is an executable linked with the Library, with the complete based on the Library), you indicate your acceptance of this machine-readable “work that uses the Library”, as object License to do so, and all its terms and conditions for copying, code and/or source code, so that the user can modify the distributing or modifying the Library or works based on it.
- Page 37 for this. Our decision will be guided by the two goals of Yoyodyne, Inc., hereby disclaims all copyright interest in the library preserving the free status of all derivatives of our free software `Frob’ (a library for tweaking knobs) written by James Random Hacker. and of promoting the sharing and reuse of software generally.
- Page 38 * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL * OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT * THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, * SERVICES;...
- Page 39 CAUSED BY THE USE OR THE INABILITY TO USE, OF THE Eric S. Raymond FREETYPE PROJECT. Gilles Vollant and with the following additions to the disclaimer: 2. Redistribution There is no warranty against interference with your enjoyment of the ------------------- library or against infringement.
- Page 40 Glenn Randers-Pehrson GNU C Library. All code incorporated from 4.4 BSD is distributed under the following glennrp at users.sourceforge.net license: February 14, 2009 Copyright (C) 1991 Regents of the University of California. 10. SQLite All rights reserved. Redistribution and use in source and binary forms, with or without All of the deliverable code in SQLite has been dedicated to the modification, are permitted provided that the following conditions HYPERLINK “http://en.wikipedia.org/wiki/Public_Domain”public...
- Page 41 EVENT SHALL INTERNET SOFTWARE CONSORTIUM BE LIABLE 1. Redistributions of source code must retain the above copyright FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL notice, this list of conditions and the following disclaimer. DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING 2. Redistributions in binary form must reproduce the above copyright FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN notice, this list of conditions and the following disclaimer in ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS...
- Page 42 0. If you receive a version of the software that is specifically labelled The following applies to portions of libidn/punycode.c and libidn/ as not being for redistribution (check the version message and/or punycode.h: README), you are not permitted to redistribute that version of the This file is derived from RFC 3492bis written by Adam M.
- Page 43 IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF that includes package A, the condition is not imposed on package B ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. (unless it uses PCRE independently). The file posix/runtests.c is copyright Tom Lord: 3.
- Page 44 For example, if you distribute copies of such a program, whether gratis The “source code” for a work means the preferred form of the work or for a fee, you must pass on to the recipients the same freedoms for making modifications to it. “Object code” means any non-source that you received.
- Page 45 limit operation or modification of the work as a means of enforcing, c) Convey individual copies of the object code with a copy of the against the work’s users, your or third parties’ legal rights to forbid written offer to provide the Corresponding Source. This alternative circumvention of technological measures.
- Page 46 7. Additional Terms. Moreover, your license from a particular copyright holder is reinstated permanently if the copyright holder notifies you of the violation by “Additional permissions” are terms that supplement the terms of this some reasonable means, this is the first time you have received notice of License by making exceptions from one or more of its conditions.
- Page 47 to copy, free of charge and under the terms of this License, through or of any later version published by the Free Software Foundation. If a publicly available network server or other readily accessible means, the Program does not specify a version number of the GNU General then you must either (1) cause the Corresponding Source to be so Public License, you may choose any version ever published by the Free available, or (2) arrange to deprive yourself of the benefit of the patent...
- Page 48 You should have received a copy of the GNU General Public License can be understood as starting with the output of the generators or along with this program. If not, see <http://www.gnu.org/licenses/>. preprocessors. Also add information on how to contact you by electronic and paper A Compilation Process is “Eligible”...
- Page 49 17. cJSON INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, Copyright (c) 2009 Dave Gamble PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS Permission is hereby granted, free of charge, to any person obtaining OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) a copy of this software and associated documentation files (the HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, “Software”), to deal in the Software without restriction, including...
- Page 50 This package may include either wpa_supplicant, hostapd, or both. See Except as contained in this notice, the name of Daniel Veillard shall not README file respective subdirectories (wpa_supplicant/README or be used in advertising or otherwise to promote the sale, use or other hostapd/README) for more details.
- Page 51 worldwide, non-exclusive, no-charge, royalty-free, irrevocable describing the origin of the Work and reproducing the content of copyright license to reproduce, prepare Derivative Works of, the NOTICE file. publicly display, publicly perform, sublicense, and distribute the 7. Disclaimer of Warranty. Unless required by applicable law or Work and such Derivative Works in Source or Object form.
- Page 52 This product has been manufactured by, and is sold under the responsibility of Gibson Innovations Ltd., and Gibson Innovations Ltd. is the warrantor in relation to this product. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V. and are used under license.