Rear Wireless Sound System User Manual Manuel D’utilisation Manual de Instrucciones rwss125_37_ENG.indd 1 rwss125_37_ENG.indd 1 RWSS125 2007-04-17 9:43:29 AM 2007-04-17 9:43:29 AM...
Page 2
Registering your model with PHILIPS makes you eligible for all of the valuable benefits listed below, so don't miss out. Complete and return your Product Registration Card at once, or register online at www.philips.com/usasupport to ensure:...
IMPORTANT SAFETY INSTRUCTIONS Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer´s instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that...
Page 4
4 CAUTION Changes or modifi cations not expressly approved by Philips could void your authority to operate this transmitter. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Page 5
‘CONSUMERS SHOULD NOTE THAT NOT ALL HIGH DEFINITION TELEVISION SETS ARE FULLY COMPATIBLE WITH THIS PRODUCT AND MAY CAUSE ARTIFACTS TO BE DISPLAYED IN THE PICTURE. IN CASE OF 525 OR 625 PROGRESSIVE SCAN PICTURE PROBLEMS, IT IS RECOMMENDED THAT THE USER SWITCH THE CONNECTION TO THE ‘STANDARD DEFINITION’...
Table of contents General Safety and Product Information ... 7 Setup precautions ... 7 Accessories supplied ... 7 About recycling ... 7 Connections System Placement ... 8 Placement ... 8 Connections and Getting Started ... 9 Connecting the transmitter ... 9 Connecting to the main unit ...
CAUTION! High voltage! Do not open the device. You run the risk of getting an electric shock. The machine does not contain any user-serviceable parts. Please leave all maintenance work to qualifi ed personnel. Setup precautions Finding a suitable location –...
Place the front of the transmitter (with Philips logo) to face the front of the wireless receiver. Place the wireless receiver behind the speakers as shown.
Connecting the transmitter Before you start... Turn off all equipment before connections. Read all accompanying operating instructions. Home theatre systems Main unit (rear panel) TRANSMITTER Connect the wireless transmitter to the WIRELESS TRANSMITTER jack on the home theatre system. To remove the transmitter, press the two buttons to release the catch.
Connections and Getting Started Switch on the wireless system Before you start... Ensure the power cord of the wireless system is connected and plugged into the AC outlet. Turn on your home theatre system. (See the accompanying user manual with your home theatre system.) The indicator “...
If a fault occurs, fi rst check the points listed below before taking the system for repair. If you are unable to remedy a problem by following these hints, consult your dealer or Philips for help. Problem If the indicator on the...