Selecting The Right Light Intensity - Philips Lumea Prestige BRI959 User Manual

20 20 English

Selecting the right light intensity

Armpit attachment (BRI956, BRI959)
The armpit attachment has a specifically curved-out design to treat hard to
reach armpit hairs.
Bikini attachment (BRI956, BRI959)
The bikini attachment has a specialized design for effective treatment of
bikini areas. It has curved out design with transparent bikini filter. Hair in this
area tends to be typically thicker and stronger then leg hair, therefore the
bikini area attachment has a special filter for treating the coarser hair in the
bikini area.
Precision attachment (BRI953, BRI954)
The precision attachment is curved-out for use in bikini and armpit areas. It
has a medium sized window with an extra transparent filter. It is designed for
precise and effective coverage of bikini and armpit areas.
Lumea provides 5 different light intensities and advises you on the right
setting you should use based on your skin tone. You will always be able to
change to a light intensity setting you find comfortable.
1 Press the on/off button to turn on the device. The device starts to operate
at light intensity setting 1.
Note: To adjust the light intensity setting manually without using the skin
advice, use the toggle button until you have reached the required setting.
The corresponding intensity light level lights up white.
2 Press the SmartSkin sensor ( ) and put the device to your skin.
3 After the device scanned your skin, the suggested intensity lights will
blink white to indicate which intensities you can use based on your skin
tone.