Problems And Solutions - Epson stylus photo 1410 Reference Manual

A test page prints showing the printer's ROM version number and a nozzle check
pattern. (If the pattern has gaps, you need to clean the print head.)
4. Turn off the printer after it prints the test page. Then reconnect the cable and
turn on your printer and computer.
■
If the test page prints, the problem probably lies in your software settings, the
cable, or your computer. It's also possible that your software may not be
installed correctly. Follow the instructions in Uninstalling Printer Software to
uninstall and reinstall your software.
■
If the test page doesn't print, you may have a problem with your printer. Try
the suggestions in Problems and Solutions. If nothing works, contact Epson as
described in Where to Get Help.

Problems and Solutions

Setup and Software Installation Problems
Printer Problems
Print Quality Problems
Paper Feeding Problems
CD/DVD Printing Problems
Miscellaneous Printout Problems
Setup and Software Installation Problems
Tip:
Periodically, it's a good idea to check Epson's support website for free updates to
your Epson Stylus Photo 1410 printing software. With Windows, you can also
click or Start menu, select Programs or All Programs, select EPSON, and
click EPSON Stylus Photo 1410 Series Driver Update for printer driver updates.
The printer makes noise after ink cartridge installation.
■
The first time you install ink cartridges, the printer must charge its print head for
about two minutes. Wait until charging finishes (the green
flashing) before you turn off the printer, or it may charge improperly and use
excess ink the next time you turn it on.
power light stops
99