Epson stylus photo 1410 Reference Manual page 95

2. Remove any paper from the sheet feeder and close the paper support.
3. Push in the output tray extension and close the tray.
4. Unplug the power cord from the electrical outlet. Then disconnect the USB cable
from the printer.
5. Repack the printer in the original box using the protective materials that came
with it.
Caution:
During transport, do not tilt the printer, stand it up vertically, or turn it upside
down, or ink may leak from the cartridges.
After transporting the printer, plug it in and turn it on. If you notice a decline in print
quality, clean the print head; if output is grainy or blurry, align the print head.
95