Epson stylus photo 1410 Reference Manual page 108

Hide thumbs Also See for stylus photo 1410:
Table of Contents

Advertisement

If paper jams, press the
turn off the printer, open the cover, and remove all the paper inside, including
small pieces that may have torn off. Then turn on the printer, reload paper, and
press the
Heavily saturated prints may curl, causing a paper jam when printing on both
sides of the paper.
If your paper loads incorrectly or jams frequently:
Use new, smooth, high-quality paper, loaded printable side up. Make sure the
paper is not curled, creased, wrinkled, too thin, or too old.
Fan the edges of the stack of paper to separate the sheets.
Don't load paper above the arrow mark inside the left edge guide.
Place the paper against the right edge behind the tab. Slide the left edge guide
against it, but not too tightly.
If you're printing on both sides of the paper, try loading fewer sheets.
Paper dust may have built up on the paper rollers. Use Epson Ink Jet Printer
Cleaning Sheets (part number S041150) to clean the rollers as follows:
Caution:
Do not use the cleaning sheets that come with Epson special papers; they may
jam inside your printer.
1. Remove any paper loaded in the printer's sheet feeder.
2. Remove the instruction sheet from the sticky side of the cleaning sheet.
Caution:
Do not follow the loading instructions on the sheet; they are not correct for your
printer. Follow the steps here instead.
108
paper button to clear the jam. If that doesn't work,
paper button.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents